Sanding and Waxing Body, First Subframe Revision

(17 days until the 2012 WHPSC)

Final wet sanding before laying up the molds.

Splish Splash, I was takin' a bath"

After several coats of wax

DOH! Fit check revealed something was WAY off - the bottom bracket was roughly three inches too low. Sliding the mount up ran it into the wheel, so I busted out the zip saw, cut off the bottom bracket, re-machined the mount, and tack welded the bottom bracket back on.

Looks like we're back on track...

... IF my left leg has enough room between the fork stanchion and the body (already considering my options if the stanchion needs a detour).

Quick, hard sprint...