Sub-Frame and Epoxy Veneer

(45 days until the 2012 WHPS)

SWEET! Pat brought the head tube reamer/facer

Head tube after reaming/facing

Here's the left side of the subframe with the fork and wheel installed

... and the right side

Closeup showing the fork

Pat holding the wheel up against the body - starting to see it?

Dad starting to mop epoxy resin

Pat bringing dad another batch of resin

This is the thin veneer of epoxy that will protect the polystyrene foam from the polyester resin when fiberglass gets applied

2012-07-27 09 epoxy resin veneer on body tooling.jpg